ComTekk Dispatcher
Version History





v2.04		2/25/09
----------------------
1. Increased allowed tone presets (memories)

v2.03		5/8/09
----------------------
1. Fixed serial PTT active-state setting on program start.  Was causing XMIT not to function properly when inverted DTR/RTS was used.
2. Set column labels in tone list after reloading xml file on program start.
3. Fixed TX delay before paging tones start.
4. Fixed TX duration too long on multiple pages.


v2.02		4/2/09
----------------------
1. Corrected TX duration calculation


v2.01		3/30/09
----------------------
1. Added "stay on top" option for main form
2. EIA tones now disabled if COM port not open in Serial Mode


===========
Version 2.00	3/23/09
===========
1. 2-tone paging now included
2. Added Serial/USB PTT control
3. New GUI
4. Multiple sound card / audio device support
5. Password-protect for settings window
6. Momentary or On/Off PTT button action
7. Added master volume and MIC volume controls


v1.05	
----------------------
1. Added relative dB indicators to Mixer controls.
2. Changed Tone Remote level calculation method to 20log(V)


v1.04	12/4/07	***CUSTOM***
----------------------
Added Reverse Mode function for RoIP base station control


v1.03	8/26/07
----------------------
Updated temp cert to facilitate online deilvery


v1.02	8/6/07
----------------------
Corrected key reg. problem


v1.01	7/24/07
----------------------
Improved calibration accuracy 


----------------------
1.00  INITIAL RELEASE 2/24/06
----------------------